Dafnetherm®
Thermal conductive compounds based on different polymers. Various fillers can be added to increase thermal properties based on customer requests.| Nazwa | Compound | Surface Resistivity IEC 93 | Thermal conductivity ISO 22007-2 - In-Plane | Thermal conductivity ISO 22007-2 - Through-Plane | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafnetherm® PPGR16 | Crystalline carbon additive, thermal conductive, electrical conductive. | 1E3 Ohm | 3 W/(m*K) | 10 W/(m*K) | HB | |
| Dafnetherm® PPBN16 | Inorganic filler, thermal conductive, electrical insulating. | > 1E12 Ohm | 1,4 W/(m*K) | 9 W/(m*K) | HB |
Dafnetec®
High Performance Polyphenylene Sulfide Compounds (PPS) with high thermal and chemical resistance. Good fire resistance. The products can be glass and carbon fiber reinforced and mineral filled. They can be colored upon specific customer requirements.| Nazwa | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafnetec® PPS P08 | PPS 40% glass fiber, flame retardante UL94 V0 1,6mm. | 1,66/1,68 g/cm3 | 15200 MPa | 10 Kj/m2 | V0 | |
| Dafnetec® PPS G12 | PPS glass fiber and mineral filler, flame retardante UL94 V0 1,6mm. | 1,96/1,98 g/cm3 | 17500 MPa | 11 Kj/m2 | V0 |
Dafnestil®
Styrenic Compound (PS) available in different grades, impact and heat resistance in accordance with the industry standards of household appliances and electric market. Some products are available halogen-based flame retardant. They can be tailor made colored, upon specific customer requirements.| Nazwa | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafnestil® KU | GPPS good fluidity and good heat resistance. | 1,05 g/cm3 | 10 gr/10' | 1,7 Kj/m2 | HB | |
| Dafnestil® AXR | HIPS high impact, flame retardant UL94 V0 1,6mm - GWFI 960 2,00mm. | 1,14/1,18 g/cm3 | 10 gr/10' | 6 Kj/m2 | V0 - GWFI 960 | |
| Dafnestil® AXF | HIPS high impact, flame retardant UL94 V2 1,6mm - GWFI 750 1,00mm. | 1,14/1,17 g/cm3 | 7 gr/10' | 5 Kj/m2 | V2 1,6mm - GWFI 750 | |
| Dafnestil® AXE | HIPS high impact, flame retardant UL94 V2 1,6mm - GWFI 960 1,00mm. | 1,17 g/cm3 | 6 gr/10' | 5 Kj/m2 | V2 1,6mm - GWFI 960 | |
| Dafnestil® AXB | HIPS high impact, flame retardant UL94 V2 1,6mm - GWFI 850 1,00mm. | 1,10/1,12 g/cm3 | 12 gr/10' | 6 Kj/m2 | V2 1,6mm - GWFI 850 | |
| Dafnestil® AT | HIPS high impact, heat resistant and high stiffness. | 1,04 g/cm3 | 5 gr/10' | 6 Kj/m2 | HB | |
| Dafnestil® AM | HIPS medium impact, good heat resistance and high stiffness. | 1,04 g/cm3 | 10 gr/10' | 5 Kj/m2 | HB |
Dafneohm®
Electrically conductive and dissipative compounds based on various resins, available in a wide range of grades. Different fillers or additives can be added to meet the requested customer conductive properties. They can be colored upon specific customer requirements.| Nazwa | Compound | Density ISO 1183 | MEF ISO 178 | Surface Resistivity IEC 60093 | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafneohm® EH K22_D | PP reinforced, electrically conductive. | 1 g/cm3 | 8000 MPa | 1E02 Ohm | HB | |
| Dafneohm® EC CB 4 | PP electrically conductive. | 1,02 g/cm3 | 1000 MPa | 3E04 Ohm | HB | |
| Dafneohm® 6A KP06 | PA6 reinforced, electrically conductive. | 1,32/1,34 g/cm3 | 14000 MPa | 5E03 Ohm | HB |
Dafnemid®
Compounds based on polyamide 6 and 66 (PA6 – PA66), with good heat resistance and good mechanical properties. Our portfolio includes different grades, reinforced with glass and carbon fiber or mineral filled; impact modified, lubricated with Silicon, PTFE or Molybdenum disulfide; halogen or halogen-free flame retardant base, UL94 listed. Our products can be tailor made colored, upon specific customer requirements.| Nazwa | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafnemid® 6XA P04 | PA6 20% glass fiber, flame retardant UL94 V0 1,7 mm, with halogen. | 1,54 g/cm3 | 6800 MPa | 6 Kj/m2 | V0 YC - GWFI 960, GWIT 850 | |
| Dafnemid® 6A P12/T | PA6 60% glass fiber, very high rigidity and strength, heat stabilized. | 1,70 g/cm3 | 19000 MPa | 16 Kj/m2 | HB | |
| Dafnemid® 6A P06 | PA6 30% glass fiber reinforced. | 1,36 g/cm3 | 8000 MPa | 12 Kj/m2 | HB YC | |
| Dafnemid® 6A MS1 | PA6 lubricated with MoS2. | 1,14 g/cm3 | 2600 MPa | 5 Kj/m2 | HB | |
| Dafnemid® 6A | PA6 medium viscosity. | 1,13 g/cm3 | 2700 MPa | 4 Kj/m2 | V2 | |
| Dafnemid® 66XA P05/T | PA66 25% glass fiber, heat stabilized, flame ritardant UL94 V0 0,8 mm, with halogens. | 1,50/1,55 g/cm3 | 8500 MPa | 9 Kj/m2 | V0 YC - GWFI 960 - GWIT 875 - RTI 140 | |
| Dafnemid® 66A T04 | PA66 lubricated Teflon. | 1,26 g/cm3 | 2800 MPa | 4 Kj/m2 | HB | |
| Dafnemid® 66A MS1 | PA66 lubricated MoS2. | 1,10/1,12 g/cm3 | 2000 MPa | 7 Kj/m2 | HB | |
| Dafnemid® 66A K04 | PA66 20% carbon fiber. | 1,22 g/cm3 | 12000 MPa | 5 Kj/m2 | HB |
Dafneloy® V
Polyesters compounds (PBT) available in different grades, high heat and chemical resistant, good dimension stability. Our products can be glass fiber reinforced; halogen-based flame retardant, UL94 certified. They can be tailor made colored, upon specific customer requirements.| Nazwa | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafneloy® V XA P06 | PBT 30% glass fiber, flame retardant UL94 V0 1,7mm. | 1,65 g/cm3 | 9500 MPa | 8 Kj/m2 | V0 YC | |
| Dafneloy® V B P06 | PBT 30% glass fiber reinforced. | 1,56 g/cm3 | 8500 MPa | 8 Kj/m2 | HB | |
| Dafneloy® V B P03 | PBT 15% glass fiber. | 1,41 - 1,44 g/cm3 | 4500 MPa | 3 Kj/m2 | HB |
Dafneloy® M
Polycarbonate Compounds (PC) offering a good combination of toughness, impact strength and high heat resistance. Our products can be glass fiber reinforced and impact modified. They are UL94 certified for flame retardance, available both halogenated and halogen-free base. They can be colored upon specific customer requirements, also in transparent colors.| Nazwa | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafneloy® M XF P02 | PC 10% glass fiber reinforced, flame retardant, halogen free, UL94 V0 1,6 mm. | 1,26/1,30 g/cm3 | 10 gr/10' | 7 Kj/m2 | V0 YC | |
| Dafneloy® M XF EA | PC flame retardant, halogen free, UL94 V0 1,0 mm, impact modified. | 1,18 g/cm3 | 8 gr/10' | 70 Kj/m2 | V0 YC | |
| Dafneloy® M XF | PC flame retardant, halogen free, UL94 V0 1,6 mm. | 1,2 g/cm3 | 10 gr/10' | 60 Kj/m2 | V0 YC | |
| Dafneloy® M XA P02 | PC 10% glass fiber reinforced, flame retardant, with halogens, UL94 V0 1,6 mm. | 1,26/1,30 g/cm3 | 10 gr/10' | 10 Kj/m2 | V0 YC | |
| Dafneloy® M C | PC high viscosity, good mechanical and high heat resistance, for transparent and solid colors. | 1,2 g/cm3 | 8 gr/10' | 70 Kj/m2 | HB | |
| Dafneloy® M B | PC medium viscosity, good mechanical and high heat resistance, for transparent and solid colors. | 1,20 g/cm3 | 12 gr/10' | 65 Kj/m2 | HB | |
| Dafneloy® M A/L | PC low viscosity, good mechanical and high heat resistance, UV stabilized, for transparent and solid colors. | 1,20 g/cm3 | 20 gr/10' | 55 Kj/m2 | HB | |
| Dafneloy® M A | PC low viscosity, good mechanical and high heat resistance, for transparent and solid colors. | 1,20 g/cm3 | 20 gr/10' | 55 Kj/m2 | HB |
Dafneloy® D
Acrylic Thermoplastic compounds (PMMA) with high transparency and gloss. Our products are listed UL94. Available in natural or colored upon specific customer requirements.| Nazwa | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafneloy® D H | PMMA good impact resistance. | 1,16 g/cm3 | 1,5 gr/10' | 6 Kj/m2 | HB | |
| Dafneloy® D A9 | PMMA low flow, high mechanical strength, for transparent and solid colors. | 1,16 - 1,18 g/cm3 | 3 gr/10' | 2 Kj/m2 | HB YC | |
| Dafneloy® D A8 | PMMA medium flow, high mechanical strength, for transparent and solid colors. | 1,16 - 1,18 g/cm3 | 7 gr/10' | 2 Kj/m2 | HB YC |
Dafnelen®
Homopolymer and Copolymer Polypropylene Compound with high mechanical properties, developed in accordance with market demands and industry standards. Products available in a wide range of colors and certified flame retardant versions available both halogenated and halogen-free.| Nazwa | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafnelen® HR 17/Y | Unfilled homopolymer polypropylene.Flame Retardant grade Halogen-free according to IEC 61249-2-21 | 17 g/10' | 1500 Mpa | 5 KJ/m2 | Classe V2 | |
| Dafnelen® HP 605/SW | PP homo 30% glass fiber, flame retardant V0 | 4 g/10' | 8000 MPa | 7 Kj/m2 | Classe V0 YC | |
| Dafnelen® HP 505/SW | PP homo 25% glass fiber, flame retardant V0 | 5 g/10' | 6500 MPa | 6 Kj/m2 | Classe V0 | |
| Dafnelen® HP 1003/S | 50% glass fibers chemical grafting. | 3 g/10' | 10500 Mpa | 12 KJ/m2 | Classe HB | |
| Dafnelen® CR 09/K | PP copo flame retardant halogen free UL94 V0 (0,8mm) | 10 g/10' | 1900 MPa | 3,5 Kj/m2 | Classe V0-5VA YC |
Dafnelan®
Compounds based on copolymer or homopolymer acetal resin (POM) with high stiffness and an outstanding wear resistance. Our products are available glass fiber reinforced; impact modified and lubricated with Silicon, PTFE or Molybdenum Disulfide. They can be tailor made colored, upon specific customer requirements.| Nazwa | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafnelan® LR9 P03/E | POM OMO 15% glass fibers, medium viscosity, high stiffness, low warpage. | 1,50 g/cm3 | 8 gr/10' | 5 Kj/m2 | HB | |
| Dafnelan® LR2 | POM OMO general purpose, high viscosity. | 1,42 g/cm3 | 2 gr/10' | 15 Kj/m2 | HB | |
| Dafnelan® LR12 | POM OMO general purpose, medium viscosity. | 1,40 g/cm3 | 12 gr/10' | 9 Kj/m2 | HB | |
| Dafnelan® GR9 T04 | POM COP PTFE modified | 1,48 - 1,50 g/cm3 | 9 gr/10' | 5 Kj/m2 | HB | |
| Dafnelan® GR9 T02 | POM COP PTFE modified. | 1,45 g/cm3 | 9 gr/10' | 5 Kj/m2 | HB | |
| Dafnelan® GR9 MS1 | POM COP lubricated MoS2. | 1,40 g/cm3 | 10 gr/10' | 6 Kj/m2 | HB |
Dafnelac®
Styrenic Compound (ABS-SAN-ASA) available in different grades in a wide range of melt flow rates, impact and heat resistance, in accordance with market demands and industry standards. Some products are available glass fiber reinforced; HB class and halogen-based flame retardant with UL94 certification. They can be tailor made colored, upon specific customer requirements, with high or low gloss.| Nazwa | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafnelac® TX | ABS very high heat resistance Vicat B/50 110°C. | 1,05 g/cm3 | 6 gr/10' | 11 Kj/m2 | HB | |
| Dafnelac® TM | ABS medium heat resistance Vicat B/50 100°C. | 1,05 g/cm3 | 16 gr/10' | 12 Kj/m2 | HB YC | |
| Dafnelac® TH | ABS high heat resistance Vicat B/50 102°C. | 1,05 g/cm3 | 13 gr/10' | 12 Kj/m2 | HB YC | |
| Dafnelac® SN AC | ABS medium flow, improved chemical resistance. | 1,04 g/cm3 | 20 gr/10' | 20 Kj/m2 | HB YC | |
| Dafnelac® SN | ABS medium flow, general purposes, good impact resistance. | 1,04 g/cm3 | 26 gr/10' | 17 Kj/m2 | HB YC | |
| Dafnelac® SF/B MET | ABS high flow, general purpose, metallized colour. Antistatic. UV stabilized. | 1,04 g/cm3 | 35 g/10' | 12 Kj/m2 | HB | |
| Dafnelac® SF/B DARK COLOR MATT | ABS good flow, low gloss appearance. Antistatic. UV stabilized. | 1,04 g/cm3 | 30 g/10' | 10 Kj/m2 | HB | |
| Dafnelac® SF/B ATX | ABS high flow and good mechanical properties. Antistatic. UV stabilized. For food compliance uses. | 1,04 g/cm3 | 35 gr/10' | 16 KJ/m2 | HB YC | |
| Dafnelac® SF/B | ABS high flow, general purpose, good impact resistance, antistatic and UV stabilized. | 1,04 g/cm3 | 35 gr/10' | 16 KJ/m2 | HB YC | |
| Dafnelac® SF/A BLACK S4F | High flow, general purpose. Black color. Antistatic. | 1,04 g/cm3 | 34 g/10' | 18 Kj/m2 | HB | |
| Dafnelac® SF/A | ABS high flow, general purpose, antistatic, good impact resistance. | 1,04 g/cm3 | 35 gr/10' | 16 KJ/m2 | HB YC | |
| Dafnelac® SF | ABS high flow, general purpose, good impact resistance. | 1,04 g/cm3 | 35 gr/10' | 16 Kj/m2 | HB YC | |
| Dafnelac® NRP P04 | SAN 20% glass fiber reinforced. | 1,22 g/cm3 | 9 gr/10' | 3 Kj/m2 | HB | |
| Dafnelac® NRP | SAN general purpose for injection moulding, for transparent and solid colors. | 1,07 g/cm3 | 15 gr/10' | 2 Kj/m2 | HB | |
| Dafnelac® KE | ABS low flow, high impact resistance, suitable for extrusion and vacuumforming. | 1,04 g/cm3 | 5 gr/10' | 25 Kj/m2 | HB | |
| Dafnelac® FXC T | ABS flame retardant, with improved heat resistance, UL94 V0 - 5VA on 1,7mm. | 1,2 g/cm3 | 25 gr/10' | 10 Kj/m2 | V0 - 5VA YC | |
| Dafnelac® FXC NEUTRO/T | ABS with goog heat resistance, good processability. Flame retardant grade with halogens. | 1,20 g/cm3 | 25 g/10' | 10 Kj/m2 | - | |
| Dafnelac® FXC B | ABS flame retardant, UL94 V0 – 5VA on 1,7mm, antistatic and UV stabilized. | 1,18 - 1,20 g/cm3 | 40 gr/10' | 11 KJ/m2 | V0 - 5VA YC | |
| Dafnelac® FXC | ABS flame retardant, UL94 V0 - 5VA on 1,7mm. | 1,18 - 1,20 g/cm3 | 40 gr/10' | 11 Kj/m2 | V0 - 5VA YC | |
| Dafnelac® AS3/LT | ASA improved thermal resistance, good chemical, UV and weathering resistance. | 1,07 g/cm3 | 10 gr/10' | 12 Kj/m2 | HB YC | |
| Dafnelac® AS2B | ASA high flow, good mechanical properties. Antistatic. UV stabilized. | 1,07 g/cm3 | 30 gr/10' | 10 KJ/m2 | HB YC |
Dafneglass®
Polypropylene Reinforced with Glass Fiber, chemically coupled or mechanical, with high thermal, impact and stiffness properties, aligned with the standards of the automotive and household appliance industries.The products are available in the color range and flame retardant grades indicated by the sectors with relevant certifications both halogenated and halogen-free.
| Nazwa | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafneglass® HP 605/K | 30% chemically coupled glass fiber reinforced polypropylene. V0 flame retardant grade. Heat stabilized. Flame Retardant grade Without halogens. | 2 g/10' | 7600 Mpa | 8 KJ/m2 | Classe HB | |
| Dafneglass® HP 505/K | PP homo 25% glass fiber, flame retardant grade without halogens, heat stabilized. | 3,5 g/10' | 7000 MPa | 7,3 Kj/m2 | Classe V0 |
Dafneblend®
Compounds available in a wide range of different polymers alloys. Our portfolio includes reinforced grades; halogen or halogen-free flame retardant grades, UL94 certified. They can be tailor made colored, upon specific customer requirements.| Nazwa | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafneblend® PX500 L | Blend PC/ASA good UV and weathering resistance, high heat resistance, good impact strength. | 1,13 - 1,16 g/cm3 | 20 g/10' | 40 Kj/m2 | HB | |
| Dafneblend® PX 200 L | Blend PC/ASA good UV and weathering resistance, good impact strength. | 1,10 - 1,13 g/cm3 | 12 gr/10' | 30 Kj/m2 | HB | |
| Dafneblend® PK 202 | Blend PA/ABS high flowability and good mechanical properties, good chemical resistance. | 1,06 g/cm3 | 55 gr/10' | 50 Kj/m2 | HB YC | |
| Dafneblend® PK 201 | Blend PA/ABS good mechanical properties, good chemical resistance. | 1,07 g/cm3 | 30 gr/10' | 60 Kj/m2 | HB YC |
| Nazwa | Compound | Density ISO 1183 | Vicat B/50 ISO 306 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafneblend® PM 750XF | Blend PC/ABS flame retardant UL94 V1 1,5mm, halogen free, ball pressure test 125°C. | 1,16 g/cm3 | 130 °C | 50 Kj/m2 | V1 | |
| Dafneblend® PM 700 | Blend PC/ABS general purpose, good flow properties, good impact and heat resistance. | 1,15 - 1,16 g/cm3 | 129 °C | 55 Kj/m2 | HB YC | |
| Dafneblend® PM 500 | Blend PC/ABS general purpose, good flow properties and good impact resistance. | 1,13 - 1,15 g/cm3 | 118 °C | 35 Kj/m2 | HB YC | |
| Dafneblend® PM 200 | Blend ABS/PC general purpose, good flow properties. | 1,10 - 1,12 g/cm3 | 110 °C | 30 Kj/m2 | HB YC | |
| Dafneblend® PK 202/L | Blend PA/ABS with high flow and good mechanical properties. UV stabilized. | 1,06 g/cm3 | 115 °C | 50 Kj/m2 | HB |
| Nazwa | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
|---|---|---|---|---|---|---|
| Dafneblend® PM 700XF | Blend PC/ABS flame retardant UL94 V0 1,5 mm, halogen free. | 1,18 g/cm3 | 2300 MPa | 50 Kj/m2 | V0 YC | |
| Dafneblend® PL 706 | Blend PC/PBT 30% glass fiber, low warpage, good chemical resistance. | 1,47 - 1,49 g/cm3 | 8000 MPa | 10 Kj/m2 | HB | |
| Dafneblend® PL 300/EC | Blend PC/PBT impact modified, good chemical resistance. | 1,18 g/cm3 | 1600 MPa | 60 Kj/m2 | HB | |
| Dafneblend® PL 200/E | Blend PC/PBT impact modified, good mechanical resistance. | 1,22 g/cm3 | 2200 MPa | 50 Kj/m2 | HB |
English
Italiano
German
Polish